⑴ all of the company's automotive products, from cars to one month, moving in 1000 to 2500 kilometers, special maintenance station from the chassis to provide users with a new maintenance go together.

Where military forces dedicated ⑵, not a mandatory maintenance go together. Milestone in the framework of the provisions of the troops to do mandatory maintenance requirements, all contributing to maintenance depots and maintenance can be combined to give away.

All ⑶ maintenance mileage more than walking, but in 3000 the total mileage of 4,000 km, time in months, repair stations and maintenance will continue to go together, but the maintenance costs go together and walk together as a result of the failure of maintenance caused by the loss of a portion of the maintenance fee by the users, taking walking together in the maintenance of security at their own expense, marked cards, and cards issued by the quality of services.

All maintenance ⑷ occurred following the oil, accessories, materials (refer to the maintenance of a variety of lubricants must be replaced, liner, filter, etc.) costs borne by the user. All requests to increase maintenance of the project go beyond the maintenance costs borne by the user.

1.2 All maintenance projects go

Cleaning ⑴ gearbox and rear axle vent in accordance with the provisions of the replacement model lubricants.

⑵ check the clutch adjustment and separation of the free trip and locking nut.

⑶ brake inspection, brake adjustment of traffic, parking brake, brake shoe friction plate and the gap between the brake drum.

Drum前后轮⑷ check axial clearance adjustment.

⑸ braking system inspection and to remove and add brake fluid leakage.

⑹ adjustment before the beam and check the tire pressure.

⑺ filter cleaning replacement batteries.

⑻ check the direction of steering adjustment free space.

⑼ check and tighten engine mount parts, chassis departments, especially before and after the spring U-bolts, steering mechanism of the joint, cross-axis and intermediate shaft bearings, tires and other bolt nut.

B-axis gearbox ⑽ fastening nut.

⑾ inspection car (truck), lighting, instruments, horn, wipers and a wiring harness plug connection is good.

⑿ vacuum and alarm system.

Cleaning ⒀ external battery, add distilled water to check, tighten connectors and battery electrode coated a thin layer of grease.

2, the maintenance of two states:

2.1 Maintenance of the scope of the secondary:

⑴ secondary road maintenance mileage interval in 6000 ~ 8000 kilometers.

2 ⑵ maintenance took place in the fuel, accessories, materials (refer to maintenance must be replaced in a variety of lubricants, liner, filter, etc.) costs. 2 maintenance man-hours fee (service station charge no more than 200 million) commitment by the user.

2.2 Maintenance of the project 2 (6000 ~ 8000KM)

2 to check the adjustment of maintenance-oriented implementation of a maintenance project and to increase the following:

⑴ adjust valve clearance, removal of coke combustion chamber.

⑵ replace engine oil, and kerosene oil to clean plate.

⑶ seized and removed in accordance with the need for fuel pump, clean air cleaner element.

⑷ crude oil to clean the filter and replace filter, clean oil filter rotor housing wall deposition dirt.

⑸ fastening the cylinder head, into the exhaust manifold, muffler bolts and check whether the liner intact.

⑹ check and adjust clutch pedal free travel.

⑺ check ministries fastening transmission, the transmission and gear wear, to add or change the gear oil, ventilation plug.

⑻ check intermediate shaft and universal joints supported松旷cases, depending on the situation of the disintegration of inspection, and universal joints to change the direction of cross-axis.

⑼ ministries after securing the bridge and whether or not leakage pores clear, add, or change the gear oil.

Frame ⑽ check, the good situation of the radiator mount.

⑾ check the work of shock absorber, shock absorber according to the circumstances to add.

⑿ leaf spring removal and lubrication, inspection horizontal Stabilizer.

Knuckle ⒀ check whether the damage and cracks, check the steering knuckle kingpin and co-ordination, the demolition of Frederick longitudinal and transverse rod and steering arm.

Frederick ⒁ demolition in accordance with the needs of the lower end of steering column shaft, and add grease.

Frederick ⒂ removed, adjusted and lubricated before the rear wheel hub and the wheel brakes, adjust the brake to detect chip mill and the gap between the brake drum and axle transposition.

Fixed steering ⒃ check the situation, add, or replace the oil, check the freedom of steering wheel shift amount.

⒄ to check the braking system to connect the various parts and injuries, adjusting the work of the foot brake pedal stroke, depending on the need for demolition seized wheel brake.

⒅ check tires, by the transposition.

Check the vacuum pump ⒆ (Diesel) work.

Voltage Regulator ⒇ inspection work.

(21) clean generators, starters, engine lubrication before and after the bearings and bearing starter.